Genie DVR BDVR-4 User Manual download pdf (Page 49)

BDVR Manual 48 Version 1.2

9. System Setup

9.1. General

１. Use the directional buttons [STWX] to select “SYSTEM” menu. Then, press [ENTER] button.

２. Use the Left/Right buttons [WX] to select menu tabs.

３. Use the Down button [T] to specify the detail.

４. Use the [-, +] buttons to change values.

５.

Save changes and exit the menu, press the [ENTER] button.

Exit the menu without making changes, press the [CANCEL] button.

ITEM ACTION

AUTO LOCK

yThe DVR locks all the buttons after three minutes of inactivity, like a

Screensaver. The buttons can be unlocked with the user password. Default is

“OFF”.

KEY TONE

y By default, the DVR emits a beep every time a button is pressed. Set the key

tone to OFF to turn button beep off. Default is “ON”

RECORD MODE

yCIF, 4/8Ch: Default setting

The system records each camera individually and then multiplexes them.

Each channel records at CIF resolution: 360x288.

• Field, 4/8Ch: The system records each camera individually and then multiplexes them.

Each channel records at Field resolution: 720x288.

• Frame, 4/8Ch: The system records each camera individually and then multiplexes

them. Each channel records at Frame resolution: 720x576

• Frame + CIF :

Channel number 1 - 720x576 + Channel number 2~8 - : 360x280

PB DEINTERLACE

y ON: Reduces image flickering but also reduces picture quality.

y OFF: Better picture quality for still images but may flicker for moving pictures.

RUN ON BOOT

y It’s purpose is to start REC, without pressing the REC button, when switched on.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 49