Genie DVR BDVR-4 User Manual download pdf (Page 44)

BDVR Manual 43 Version 1.2

8. Network Setup

A static service has an IP address that remains constant for the duration of the contract

with the Internet Service Provider (ISP), whereas a dynamic service consists of an IP

address that possibly changes every time a new connection is made through the ISP, or

recurrently in a given period of time. Most Internet Service Providers offer both solutions and

this manual distinguishes between them, according to commonly available service types,

when configuring the DVR for networking purposes.

8.1. IP setup

１. Use the directional buttons [ ] to select “NETWORK” menu. Then, press the [ENTER]

button to display “Network”.

２. Use the Down button [

] to specify the connection details.

３. Use the [-, +] buttons to change values.

４. Save changes and exit the menu, press the [ENTER] button.

Exit the menu without making changes, press the [CANCEL] button.

ITEM ADJUSTMENT

CONFIG

y STATIC IP: Edit IP address, Gateway and Network Subnet Mask.

y DHCP: Dynamic Host Configuration Protocol.

It is set automatically from DHCP if there is a Local DHCP server (i.e. Local

Router). If DHCP is set to ON, the IP address, Gateway and Subnet Mask

are assigned by the DHCP Server (i.e. the Local Area Network Router).

IP Address y Enter the Static IP address

Netmask y Enter the address of the Subnet Mask.

Gateway y Enter the IP address for the internet Gateway Server.

DNS Server y Verify the address of the domain name system (DNS) Server

PORT y Select “0000 ~ 9999”

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 44