Genie DVR BDVR-4 User Manual Page 38

  • Download
  • Add to my manuals
  • Print
  • Page
    / 104
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 37
BDVR Manual 37 Version 1.2
6.2. Alarm Setup
ITEM ADJUSTMENT
RECORD TIME
y Determines the duration of recording after the alarm signal has been
activated. [10SEC ~ 300SEC]
RECORD CAMERA
y ALL: Start to record All Alarm “ON” channels if any Alarm signal is
triggered.
y 1:1: Start to record the Channel on which the Alarm is triggered.
ALARM BUZZER
y ON: The Buzzer sounds if an alarm is triggered. The Buzzer sounds for the
duration of the RECORD TIME. This buzzer relates to Alarm Out.
Configure Alarm Out as “ON” for the Alarm Buzzer.
yOFF: Disables the ALARM BUZZER function.
ALARM OUT1
y Configure which relay is triggered when an alarm is activated, per camera.
Select from four available options:
Video Loss, Motion, Alarm ALL, Each Alarm, System.
y Press the [Cancel] button to stop Alarm Out.
It is cleared in order: Alarm>Motion> Video Loss
6. Save changes and exit the menu, press the [ENTER] button.
7. Pressing the [REC] button, after setting RECORD ENABLE, lights the red REC LED on
the front panel and recording starts.
Note: If “System” is selected, the relay is triggered when the System
has problems such as HDD FAIL, Power Loss etc.
Note: Press the [-] button to stop the buzzer immediately. Stopping the
buzzer does not stop the alarm recording.
Page view 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 103 104

Comments to this Manuals

No comments