Genie DVR BDVR-4 User Manual download pdf (Page 37)

BDVR Manual 36 Version 1.2

6. Alarm Recording

Always verify the Alarm Record settings prior to starting alarm recording. Please note that

alarm recording is independent of any recording modes. Alarm Record starts after Alarm

Record Enable.

6.1. Record Setup

1. Use the directional buttons [STWX] to select the “ALARM” menu. Then, press the

[ENTER] button to display “Alarm Record Setup”.

2. Use the Left/Right buttons [WX] to select a menu tab ( ).

Use the directional buttons [STWX] to select the Camera you wish to configure.

Use the [-, +] buttons to change values.

ITEM ADJUSTMENT

USE y Enable or Disable Alarm Recording, on a per camera basis.

QUALITY

y Specify the record picture quality for each camera on Alarm Recording.

ULTRA Æ SUPER Æ HIGH Æ MIDDLE Æ LOW

RATE y Select the recording rate of each camera when an Alarm is triggered

AUDIO y Select Audio recording: ON or OFF.

INPUT y Specify the type of Alarm Input device.

Note: Press the [MENU] button on the first line of each item to apply the setting for the remaining

channels.

Save changes and exit the menu, press the [ENTER] button.

Exit the menu without making changes, press the [CANCEL] button.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 37