Genie DVR BDVR-4 User Manual download pdf (Page 27)

BDVR Manual 26 Version 1.2

During Live View mode or Playback, it is possible to zoom into a section of the screen to get

a close-up view of the image.

1. To activate the digital zoom, select the full screen display of the camera you wish to

zoom.

2. Then press the [ZOOM] button on the IR Remote controller. A Zoom area box pops

up, as shown below.

3. Move the box to the desired position using the directional [

] buttons.

4. Press the [+] button to enlarge the image and the [ - ] button to zoom out the image.

5. Press the [CANCEL] button to return normal mode.

Note:

If the Zoom button is pressed while in a multi-screen display, the zoom operation is not

activated. It MUST be a full screen display.

4. Spot Monitor

In addition to the Main Monitor, attaching a Spot Monitor enables a user to monitor specific

channels independently from the main monitor.

y Press the [Spot] button on the remote controller, then press the number button you wish

watch as full screen.

y Press the [Spot] button twice to auto switch cameras. The Sequence interval can be set in

the Sequential Setup.

y When an alarm has been triggered, that specific channel goes into Full Screen.

x 2 x 4

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 27