Genie DVR BDVR-4 User Manual download pdf (Page 35)

BDVR Manual 34 Version 1.2

5. Continuous Recording (Normal Recording)

The DVR comes with certain preset settings from the factory. Therefore, once the DVR

is installed immediate recording is possible by pressing the record button. By default,

audio alarm and motion recording are set to OFF.

１. Use the directional buttons [ ] to select “RECORD” menu. Then, press the [ENTER]

button to display “RECORD”.

２. Use the directional buttons [

] to select the Camera you wish to configure.

３. Use the [-, +] buttons to change values.

ITEM ADJUSTMENT

USE y Enable or Disable Recording on each camera.

QUALITY

y Specify the record picture quality for each camera.

ULTRA Æ SUPER Æ HIGH Æ MIDDLE ÆLOW

RATE

y Select the recording speed for each camera.

: Recording resolutions change between Frame, Field and CIF.

AUDIO

ySelect Audio recording: ON or OFF.

The audio data is always recorded in real time unlike the video data which could be

recorded in various modes, including real time. There may be a slight delay in

synchronisation of the audio to video data.

MOTION

ySelect Motion Recording ON or OFF. Camera does not record under normal

conditions. See the Motion Recording section.

Note: Press the [MENU] button on the first line of each item to apply the setting for the remaining

channels.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 35