Genie DVR BDVR-4 User Manual download pdf (Page 53)

BDVR Manual 52 Version 1.2

9.5. UPDATE.

1) Download the latest firmware file and copy to a USB Flash memory stick in the Root Folder.

2) Turn on your DVR (if in use, please stop recording)

3) Plug USB memory stick into the front USB port and check if USB icon shows up on the Status bar.

4) Move to upgrade menu and start the upgrade by pressing [+]/[enter] button.

5) Wait until upgrade finishes and the “Success” message is shown, then Press [+] to restart.

Note:

While in recording mode, you cannot update DVR. Stop recording to update.

< Record Mode>

Indicator CONDITION

H/W VERSION y Shows the Main PCB version of the system.

S/W VERSION y Shows the Software version of the system.

NOTE:

1. Make sure the USB Flash memory stick has enough space for update file size.

2. Do not make a special folder in the memory stick for these files.

3. Do not format the USB, just remove all files inside.

4. Do not switch OFF or PRESS any key during the upgrade process.

5. Please consult with your installer or dealer before upgrading the DVR.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 53