Genie DVR BDVR-4 User Manual download pdf (Page 34)

BDVR Manual 33 Version 1.2

y Motion detected zones are changed to a BLUE Colour.

y Use the Numeric button to select Motion Grid. GREY mask is cleared, or use

<+> button to select Motion Grid on the Front Panel. A Running Man Icon

activated. The <+> button is used for selecting and canceling. Use the <-> button

to escape from the Grid Menu.

y It is also possible to select smaller motion grids for more precise motion

detection using the CMS.

5. Save changes and exit the menu, press [ENTER] button. Then go “RECORD” Menu.

6. Select “ON” or “OFF” to Enable or Disable motion detection, on a per camera basis,

as shown below.

Press the REC button, and Recording starts according to configured Recording Quality

and Frame Rate when Motion is detected. It reverts back to stand-by mode after

motion recording time ends. Camera does not record under normal conditions.

Note: Motion Duration is extended if another motion is detected while in motion

recording.

Note: There may be cases when the recorder’s built-in motion detection function does

not operate properly due to the condition of the input video signal, or other factors.

Note: It is recommended that at least 3 motion blocks are selected to get more accurate

motion recording.

Motion Detected zones

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 34