Genie DVR BDVR-4 User Manual download pdf (Page 56)

BDVR Manual 55 Version 1.2

The layout of the PTZ interface conforms to the layout on the front of the DVR and the

remote controller. The Menu button is the guide anchor position for all other buttons.

When in PTZ interface mode, all buttons are used for PTZ related operations.

** Please check the following before using a PTZ camera

1. RS 422/485 Connection, Camera Jumper Setting etc.

2. Set the correct PTZ Camera ID & Model No. in the Display Menu

2. Preset & Tour

Button Function

Set preset position; SPOT OUT on remote controller

Move the PTZ to the desired location.

Press the Preset button.

Custom 1 illuminates.

Set the # for the Preset location.

Press Enter to save and exit.

Go to preset position; INFO on remote controller

Press Go button.

Enter the desired Preset # and press Enter.

Start Auto Tour; BACKUP on remote controller

Press Auto Tour Button.

Press the + button and enter the range of Presets and press Enter.

For Example, Auto Tour Button, +5 starts a tour of presets 1 ~ 5 on the

PTZ Camera

3. Custom Functions

Button Function

PTZ custom function 1; DISPLAY on remote controller

PTZ custom function 2; ZOOM on remote controller

PTZ custom function 3; P/T/Z on remote controller

Please refer to the PTZ manufacturer’s instruction manual for the correct jumper settings to

match the protocols in the DVR.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

No comments

Genie DVR BDVR-4 User Manual Page 56