Genie Excelerator User Manual download pdf (Page 13)

A CAUTION

Doors made of masonite, lightweight wood, fiberglass, metal,

or other lightweight materials must be properly braced

before mounting door Opener.

For stictional doors;

A Place Door Bracket on door center line, no lower than top

roller, and mark holes (Figure 19).

B Attach Door Bracket:

• For metal doors, use 3 (1/4" -20 x 3/4") Self-Drilling

Screws (provided).

• For wood doors, use 3 (1/4" x 2") Lag Screws or

3 (1/4" X 11 /4") Lag Screws (not provided).

NOTE

Before installing, check length of the included Lag Screws vs.

the thickness of your garage door. For doors thinner than 2",

use 11/4" Lag Screws. Check door condition and thickness.

See page 3.

(28

(5^ or (g)

(28)

SECTIONAL DOORS ONE-PIECE DOORS

Center Line of dooL,-::;:=:gi J Center Line of door .

/. I OR

Attach no "

lower than.1

top rollers

■'Attach at j

highest point j

on door

Optional Door Operator Bracket (not included)

Figure 19 Attach Door Bracket

For ontf-plecef doors:

A Position Door Bracket on door's center line, as high as

possible or on top of door.

B Attach Door Bracket:

• For metal doors, use 3 (1/4" -20 x 3/4") Self-Drilling

Screws.

• For wood doors, use 3 (1/4" x 2") Lag Screws.

A While supporting the Power Head, place threaded end of Rail

Strap Bolt through Header Bracket hole (Figure 20).

B Attach (5/16"-18) Flange Nut to Rail Strap Bolt.

Finger-tighten until later.

FcM' Help, call 1-800-3S4SEiiE or visit svswi.ferileccirnpiirif.corn

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Genie Excelerator User Manual Page 13

Comments to this Manuals

Related products and manuals for For the car Genie Excelerator