Genie TZ-50 User Manual download pdf (Page 30)

28 Genie TZ-50 Part No. 114164

Operator's Manual Second Edition • First Printing

Battery Charging Instructions

Observe and Obey:

Do not use an external charger or booster

battery.

Charge the battery in a well-ventilated area.

Use the proper AC input voltage for charging

as indicated on the charger.

Use only a Genie authorized battery and

charger.

Use the engine or the AC battery charger to

recharge the batteries.

Charging the Batteries with the

Engine

Running the engine will automatically charge the

batteries.

All lift and drive functions can be operated while

the engine is running.

Charging the batteries with the engine does not

fully charge the batteries. Periodically, use the AC

battery charger to fully charge the batteries.

Charging the Batteries with the

AC Charger

1 Be sure the engine (if equipped) is turned off.

2 Be sure the batteries are connected before

charging the batteries.

3 Open the machine covers. The covers should

remain open for the entire charging cycle.

4 Remove the battery vent caps and check the

battery acid level. If necessary, add only

enough distilled water to cover the plates. Do

not overfill prior to the charge cycle.

5 Replace the battery vent caps.

6 Connect the battery charger to a grounded AC

circuit.

7 Turn the battery charger on.

8 The charger will automatically shut off when the

charging cycle is complete.

9 Check the battery acid level when the charging

cycle is complete. Replenish with distilled water

to the bottom of the fill tube. Do not overfill.

OPERATING INSTRUCTIONS

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 40 41

Comments to this Manuals

No comments

Genie TZ-50 User Manual Page 30

Comments to this Manuals

Related products and manuals for Tools Genie TZ-50