Genie TZ-50 User Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 41
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
Part No. 114164 Genie TZ-50 19
Operator's Manual
Second Edition • First Printing
FUNCTION TESTS
Test Drive and Brake System
(if equipped)
ANSI, CSA and Australian models: Perform this
test from the platform or the ground, using the
drive control box located next to the platform.
CE models: Perform this test from the ground,
using the drive control box mounted next to the
ground controls.
Note: When operating the drive control system
from the ground, remove the drive control box
from its mounting and step away from the
machine. Maintain safe distances between the
operator, the machine and fixed objects.
42 Fully retract and lower the platform.
43 Manually engage the drive wheels by pulling
the drive wheel lever toward the tire on each
side of the machine.
44 Release parking break on the tongue.
45 ANSI, CSA and Australian models: At the
drive control box mounted next to the platform
controls, press and hold the blue function
enable button and raise the outriggers.
CE models: At the ground controls, press and
hold the blue function enable button and raise
the outriggers.
46 Press and hold the function enable button on
the drive control handle.
47 Slowly move the drive control handle in the
direction that one of the blue arrows points until
the machine begins to move, then return the
handle to the center position.
Result: The machine should move in the
direction that the blue arrow points, then come
to an abrupt stop.
48 Repeat this procedure for each blue arrow.
49 Slowly move the drive control handle in the
direction that one of the yellow arrows points
until the machine begins to move, then return
the handle to the center position.
Result: The machine should move in the
direction that the yellow arrow points, then
come to an abrupt stop.
50 Repeat this procedure for each yellow arrow.
Note: The brakes must be able to hold the
machine on any slope it is able to climb.
Page view 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 40 41

Comments to this Manuals

No comments