Genie TZ-50 User Manual download pdf (Page 26)

24 Genie TZ-50 Part No. 114164

Operator's Manual Second Edition • First Printing

Platform Overload Indicator Light

(if equipped)

Light flashing indicates the platform

is overloaded and no functions will

operate.

Remove weight from the platform

until the light goes off.

Fall Protection

Personal fall protection equipment (PFPE) is

required when operating this machine.

All PFPE must comply with applicable

governmental regulations, and must be inspected

and used in accordance with the PFPE

manufacturer’s instructions.

Optional Drive System Operation

1 Be sure the platform is fully lowered. The drive

function will not operate unless the platform is

fully lowered.

2 Manually engage the drive wheels by pulling

the drive wheel lever toward the tire on each

side of the machine.

3 Release the parking brake on the tongue.

OPERATING INSTRUCTIONS

ANSI, CSA and Australian models: Operate the

drive system from the platform using the drive

control box mounted next to the platform. Press

and hold the blue function enable button. Press

and hold the auto level button to raise the

outriggers.

Note: The drive system control box can be

detached from the machine and used while

standing on the ground. Remove the drive control

box from its mounting and step away from the

machine to drive.

CE models: At the ground controls, press and

hold the blue function enable button. Press and

hold the auto level button or the individual

outrigger buttons to raise the outriggers. Operate

the drive controls from the ground using the

control box mounted next to the ground controls.

Remove the drive control box from its mounting

and step away from the machine to drive.

4 Press and hold the function enable button on

the drive control handle.

5 Move the drive control handle off center. Use

the color-coded direction arrows on the control

panel to determine the direction of machine

travel.

6 Before raising the platform, lower the outriggers

and adjust to level the machine and raise the

wheels off the ground.

Note: Use the bubble level to make sure the

machine is level.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 40 41

Comments to this Manuals

No comments

Genie TZ-50 User Manual Page 26

Comments to this Manuals

Related products and manuals for Tools Genie TZ-50