Genie AWP 114002 User Manual download pdf (Page 25)

Operator’s ManualThird Edition • Fourth Printing

Part No. 114002 Genie AWP Super Series 23

Loading for Transport

1 Fully lower the platform.

2 Push in the red Emergency Stop buttons, turn

the key switch to the off position and remove

the key.

3 Remove the outriggers from the base and place

them in the storage sockets.

4 DC models: Disconnect the battery cable and

remove the battery pack.

5 Inspect the entire machine for loose or

unsecured items.

6 Slide the stop bracket to the top lock position.

a stop bracket

b loading pivot

All models without tilt-back frame

a stop bracket

b loading pivot

All models with tilt-back frame

7 Hook the loading pivot to the stop bracket.

TRANSPORT INSTRUCTIONS

8 Position the machine

flush against the

loading surface.

Lower and lock the

stop bracket to the

lowest lock pin

position above the

loading surface.

9 All models with tilt-back frame:

Be sure both stop bracket lock pins are fully

locked.

Be sure both tilt-back frame swivel casters are

locked.

10 Slide out the T-handle until the lock pin snaps

into place.

11 Lift the T-handle to

tilt the machine

onto the loading

surface. Use the

appropriate number

of people and

proper lifting

techniques.

12 Carefully push

the machine into

the transport

position.

13 Return the sliding

T-handle to the

stowed position.

14 Secure the machine base and mast to the

transport vehicle. See Securing the Machine on

the next page.

15 Reverse this procedure to unload the machine.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 35 36

Comments to this Manuals

No comments

Genie AWP 114002 User Manual Page 25

Comments to this Manuals

Related products and manuals for For the car Genie AWP 114002