Genie AWP 114002 User Manual download pdf (Page 16)

Operator’s Manual Third Edition • Fourth Printing

14 Genie AWP Super Series Part No. 114002

MAINTENANCE

Check the Oil Lubricator

Canister Drip Rate - Air Models

Maintaining the proper oil drip rate into the lubricator

canister is essential to safe operation and good

machine performance. Failure to maintain the

proper drip rate could result in machine component

damage.

1 While raising the platform, visually inspect the

oil lubricator sight gauge.

Result: There should be a maximum of 1 to 2

drops of oil visible in the sight gauge.

2 To adjust the drip rate, turn the oil flow control

valve clockwise to decrease the flow or

counterclockwise to increase the flow.

3 Repeat this procedure until the proper oil drip

rate is achieved.

Check the Air Filter/Regulator

Canister - Air Models

It is essential to drain the air filter/regulator canister

of water to ensure good air motor performance and

service life. A water-filled canister could cause the

air motor to perform poorly and continued use could

cause component damage.

1 Check the air filter/regulator canister for any

water accumulation.

2 If water is visible, loosen the drain plug at the

bottom of the canister and allow the water to

drain out.

3 Tighten the drain plug.

Scheduled Maintenance

Maintenance performed quarterly, annually and

every two years must be completed by a person

trained and qualified to perform maintenance on this

machine according to the procedures found in the

service manual for this machine.

Machines that have been out of service for more

than three months must receive the quarterly

inspection before they are put back into service.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

No comments

Genie AWP 114002 User Manual Page 16