Genie AWP 114002 User Manual download pdf (Page 28)

Operator’s Manual Third Edition • Fourth Printing

26 Genie AWP Super Series Part No. 114002

TILTBACK OPERATION INSTRUCTIONS

Lowering the Tilt-back

Assembly

1 Be sure the area behind the machine and under

the tilt-back frame is clear of personnel and

obstructions.

2 Fully lower the platform.

3 Remove the outriggers from the base and place

them in the storage sockets.

The tilt-back

frame is spring

loaded and will

immediately fall

outward when the

retaining pin is

removed.

Maintain a firm

grasp on the tilt-

back frame and

remove the

retaining pin.

4 Lower the tilt-back frame and guide the tilt-back

strut into the strut socket.

5 Insert the retaining pin into the strut socket.

Tilting Back the Machine

1 Slide out the T-

handle until the lock

pin snaps into

place.

2 Lift the machine

with the T-handle to

mid-tilt position—

casters on the tilt-back frame are in contact with

the floor, and the machine is supported by the

extended tilt-back strut. Use the appropriate

number of people and proper lifting techniques.

3 Continue lifting until the telescoping tilt-back

strut is completely compressed.

4 Return the sliding T-handle to the stowed

position.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

No comments

Genie AWP 114002 User Manual Page 28