Genie AWP 114002 User Manual download pdf (Page 12)

Operator’s Manual Third Edition • Fourth Printing

10 Genie AWP Super Series Part No. 114002

Pre-operation Inspection

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

2 Always perform a pre-operation

inspection.

Know and understand the pre-operation

inspection before going on to the next

section.

3 Always perform the function tests prior to

use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

Breather Cap - AC & DC Models

Component damage will occur if the machine

is operated without a breather cap. Check to make

sure the breather cap is in place in the hydraulic

reservoir.

AWP-36 & AWP-40: The

first time these machines

are set up for use, the pipe

plug in the hydraulic

reservoir should be

removed and permanently

replaced with a breather

cap.

A breather cap is supplied and can be found

in an envelope taped to the mast near the

platform controls.

Fundamentals

It is the responsibility of the operator to perform a

pre-operation inspection and routine maintenance.

The pre-operation inspection is a visual inspection

performed by the operator prior to each work shift.

The inspection is designed to discover if anything

is apparently wrong with a machine before the

operator performs the function tests.

The pre-operation inspection also serves to

determine if routine maintenance procedures are

required. Only routine maintenance items specified

in this manual may be performed by the operator.

Refer to the list on the next page and check each

of the items.

If damage or any unauthorized variation from

factory delivered condition is discovered, the

machine must be tagged and removed from

service.

Repairs to the machine may only be made by a

qualified service technician, according to the

manufacturer's specifications. After repairs are

completed, the operator must perform a

pre-operation inspection again before going on to

the function tests.

Scheduled maintenance inspections shall be

performed by qualified service technicians,

according to the manufacturer's specifications and

the requirements listed in the responsibilities

manual.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Comments to this Manuals

No comments

Genie AWP 114002 User Manual Page 12

Comments to this Manuals

Related products and manuals for For the car Genie AWP 114002