Genie Z-25J User Manual download pdf (Page 15)

Operator's ManualFourth Edition · First Printing

Part No. 114339 Z-45/25 • Z-45/25J 13

Do not raise or extend the boom unless the

machine is on a firm, level surface.

Do not depend on the tilt alarm as a level indicator.

The tilt alarm sounds in the platform only when the

machine is on a severe slope.

If the tilt alarm sounds while the boom is lowered:

Do not extend, rotate or raise the boom above

horizontal. Move the machine to a firm, level

surface before raising the platform.

If the tilt alarm sounds when the platform is raised:

Use extreme caution. Identify the condition of the

boom on the slope as shown below. Follow the

steps to lower the boom before moving to a firm,

level surface. Do not rotate the boom while

lowering.

If the tilt alarm sounds with the

platform uphill:

1 Lower the primary boom.

2 Lower the secondary boom.

3 Retract the primary boom.

If the tilt alarm sounds

with the platform downhill:

1 Retract the primary

boom.

2 Lower the secondary

boom.

3 Lower the primary

boom.

Do not raise the boom when wind speeds may

exceed 28 mph / 12.5 m/s. If wind speeds exceed

28 mph / 12.5 m/s when the boom is raised, lower

the boom and do not continue to operate the

machine.

Do not operate the machine in strong or gusty

winds. Do not increase the surface area of the

platform or the load. Increasing the area exposed to

the wind will decrease machine stability.

Use extreme care and slow speeds while driving

the machine in the stowed position across uneven

terrain, debris, unstable or slippery surfaces and

near holes and drop-offs.

Do not drive the machine on or near uneven terrain,

unstable surfaces or other hazardous conditions

with the boom raised or extended.

Do not use the machine as a crane.

Work Area Safety

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 58 59

Comments to this Manuals

No comments

Genie Z-25J User Manual Page 15

Comments to this Manuals