Genie Z-25J User Manual Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
Operator's ManualFourth Edition · First Printing
Part No. 114339 Z-45/25 • Z-45/25J 49
Maintenance
Observe and Obey:
Only routine maintenance items specified in this
manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Use only Genie approved replacement parts.
Maintenance Symbols Legend
The following symbols have been used in this
manual to help communicate the intent of the
instructions. When one or more of the symbols
appear at the beginning of a maintenance
procedure, it conveys the meaning below.
Indicates that tools will be required to
perform this procedure.
Indicates that new parts will be required to
perform this procedure.
Indicates that a cold engine is required
before performing this procedure.
Check the Engine Oil Level
Maintaining the proper engine oil level is essential
to good engine performance and service life.
Operating the machine with an improper oil level
can damage engine components.
Note: Check the oil level with the engine off.
1 Remove the safety pin from the engine pivot
plate latch.
The engine pivot plate latch is located under the
engine turntable pivot plate at the counterweight
end of the machine.
2 Open the engine pivot plate latch and swing the
engine pivot plate out and away from the
machine.
3 Check the oil dipstick. Add oil as needed.
4 Swing the engine back to its original position
and close the engine pivot plate latch.
5 Install the engine pivot plate safety pin.
Perkins 404C-22 Engine
Oil type 15W-40
Oil type - cold conditions 5W-40
Ford DSG-423 EFI Engine (EPA Compliant)
Oil type 5W-20
Deutz F3L 2011 Engine
Oil type 15W-40
Oil type - cold conditions 5W-30
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Comments to this Manuals

No comments