Genie Z-25J User Manual download pdf (Page 46)

Operator's Manual Fourth Edition · First Printing

44 Z-45/25 • Z-45/25J Part No. 114339

Operating Instructions

Drive Enable

Light on indicates that the

boom has moved just past

either non-steer wheel and the

drive function has been

interrupted.

To drive, hold the drive enable switch to either side

and slowly move the drive control handle off center.

Be aware that the machine may move in the

opposite direction that the drive and steer controls

are moved.

Always use the color-coded direction arrows on the

platform controls and the drive chassis to identify

the direction the machine will travel.

Drive Speed Select

· Machine on incline symbol: Low range operation

for inclines

· Machine on level surface symbol: High range

operation for maximum drive speed

Engine Idle Select (rpm)

When the foot switch is not pressed, the engine will

idle at the lowest rpm.

· Turtle symbol: Foot

switch activated low

idle

· Rabbit symbol: Foot

switch activated high

idle

Generator (if equipped)

To start the generator,

move the generator toggle

switch to the on position.

Plug a power tool into the

power to platform GFCI

outlet.

To turn off the generator, move the generator toggle

switch to the off position.

Note: Machine functions will not operate while the

generator is running and the foot switch is not

pressed down. When the foot switch is pressed

down, the generator will turn off and the machine

functions will operate.

Machine Not Level Indicator

Light (if equipped)

Light on indicates the machine is not

level. The tilt alarm will be sounding

when this light is on. Move the

machine to a firm level surface.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 58 59

Comments to this Manuals

No comments

Genie Z-25J User Manual Page 46

Comments to this Manuals