Genie Z-25J User Manual Page 53

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 52
Operator's ManualFourth Edition · First Printing
Part No. 114339 Z-45/25 • Z-45/25J 51
Maintenance
Check the Batteries
Proper battery condition is essential to good engine
performance and operational safety. Improper fluid
levels or damaged cables and connections can
result in engine component damage and hazardous
conditions.
Electrocution hazard. Contact with hot or live
circuits may result in death or serious injury.
Remove all rings, watches and other jewelry.
Bodily injury hazard. Batteries contain acid.
Avoid spilling or contacting battery acid.
Neutralize battery acid spills with baking soda
and water.
1 Put on protective clothing and eye wear.
2 Be sure that the battery cable connections are
tight and free of corrosion.
3 Be sure that the battery hold-down bracket is
secure.
4 Remove the battery vent caps.
5 Check the battery acid level. If needed,
replenish with distilled water to the bottom of the
battery fill tube. Do not overfill.
6 Install the vent caps.
Note: Adding terminal protectors and a corrosion
preventative sealant will help eliminate corrosion on
the battery terminals and cables.
Check the Tire Pressure
Tip-over hazard. An over-inflated tire can
explode which may compromise machine
stability and cause the machine to tip over.
Tip-over hazard. The use of temporary flat tire
repair products may lead to tire failure which
could compromise machine stability and
cause the machine to tip over.
Bodily injury hazard. An over-inflated tire can
explode and may cause death or serious
injury.
Note: This procedure does not need to be
performed on machines equipped with foam-filled
tires.
1 Check each tire with an air pressure gauge and
add air as needed.
Tire specifications 2WD Models 4WD Models
Narrow base models Foam-filled
Industrial tire Only
Models with Aircraft Foam-filled Foam-filled
Protection Package Only Only
Standard base models
Industrial tire 100 psi /
Tire size: 9-14.5 LT 6.9 bar
Standard base models 50 psi / 50 psi /
Rough terrain tire 3.5 bar 3.5 bar
Tire size: 355/55D625 14 ply
High flotation tires 38 psi / 38 psi /
Tire size: 33/16LL500 2.6 bar 2.6 bar
Page view 52
1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59

Comments to this Manuals

No comments