Genie GS-2668 DC User Manual download pdf (Page 7)

Part No. 82750 Genie GS-2668 DC and Genie GS-3268 DC 5

Operator's ManualThird Edition • Third Printing

SAFETY RULES

Collision Hazards

Be aware of limited sight

distance and blind spots

when driving or operating.

Be aware of the extended platform position when

moving the machine.

The machine must be on a level surface or secured

before releasing the brakes.

Operators must comply with employer, job site and

governmental rules regarding the use of personal

protective equipment.

Check the work area for overhead obstructions or

other possible hazards.

Be aware of crushing hazards when grasping the

platform guard rail.

Observe and use the color-coded direction arrows

on the platform controls and platform decal plate for

drive and steer functions.

Do not operate a machine in the path of any crane

or moving overhead machinery unless the controls

of the crane have been locked out and/or

precautions have been taken to prevent any

potential collision.

No stunt driving or horseplay while operating a

machine.

Do not lower the platform unless the area below is

clear of personnel and obstructions.

Limit travel speed according to the condition of the

ground surface, congestion, slope, location of

personnel and any other factors which may cause

collision.

Bodily Injury Hazard

Do not operate the machine with a hydraulic oil or

air leak. An air leak or hydraulic leak can penetrate

and/or burn skin.

Improper contact with components under any cover

will cause serious injury. Only trained maintenance

personnel should access compartments. Access

by the operator is only advised when performing a

pre-operation inspection. All compartments must

remain closed and secured during operation.

Component Damage Hazards

Do not use the machine as a ground for welding.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Genie GS-2668 DC User Manual Page 7

Comments to this Manuals