Genie GS-2668 DC User Manual download pdf (Page 16)

14 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750

Operator's Manual Third Edition • Third Printing

Check the Batteries

Proper battery condition is essential to good

performance and operational safety. Improper fluid

levels or damaged cables and connections can

result in component damage and hazardous

conditions.

This procedure does not need to

be performed on machines with

sealed or maintenance-free

batteries.

Electrocution hazard. Contact with

hot or live circuits may result in

death or serious injury. Remove all

rings, watches and other jewelry.

Bodily injury hazard. Batteries

contain acid. Avoid spilling or

contacting battery acid. Neutralize

battery acid spills with baking soda

and water.

Perform this test after fully

charging the batteries.

1 Put on protective clothing and eye wear.

2 Be sure that the battery cable connections are

tight and free of corrosion.

3 Be sure that the battery hold-down brackets are

in place and secure.

4 Remove the battery vent caps.

5 Check the battery acid level of each battery. If

needed, replenish with distilled water to the

bottom of the battery fill tube. Do not overfill.

6 Install the vent caps.

Adding terminal protectors and a

corrosion preventative sealant will

help eliminate corrosion on the

battery terminals and cables.

Scheduled Maintenance

Maintenance performed quarterly, annually and

every two years must be completed by a person

trained and qualified to perform maintenance on ths

machine according to the procedures found in the

service manual for this machine.

Machines that have been out of service for more

than three months must receive the quarterly

inspection before they are put back into service.

MAINTENANCE

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Comments to this Manuals

No comments

Genie GS-2668 DC User Manual Page 16

Comments to this Manuals