Genie GS-2668 DC User Manual download pdf (Page 24)

22 Genie GS-2668 DC and Genie GS-3268 DC Part No. 82750

Operator's Manual Third Edition • Third Printing

Operation From Platform

1 Turn the key switch to platform control.

2 Pull out the ground and platform red Emergency

Stop buttons to the on position.

3 Be sure the battery pack is connected before

operating the machine.

To Position Platform

1 Press the lift function select button.

2 Press and hold the function enable switch on the

control handle.

3 Move the control handle according to the

markings on the control panel.

To Steer

1 Press and hold the function enable switch on the

control handle.

2 Turn the steer wheels with the thumb rocker

switch located on the top of the control handle.

To Drive

1 Press and hold the function enable switch.

2 Increase speed: Slowly move the control handle

off center.

Decrease speed: Slowly move the control

handle toward center.

Stop: Return the control handle to center or

release the function enable switch.

Use the color-coded direction arrows on the

platform controls and on the platform to identify the

direction the machine will travel.

Machine travel speed is restricted when the

platform is raised.

Battery condition will affect machine performance.

When the battery charge indicator light flashes, the

machine drive speed is limited and the lift function

is disabled.

Auxiliary Lowering

Machines equipped with a separate

auxiliary lowering button next to the

ground control panel:

1 Turn the key switch to ground

control.

2 Pull out the ground red Emergency Stop button

to the on position.

3 Push and hold the auxiliary lowering button.

Machines not equipped with a separate auxiliary

lowering button:

1 Turn the key switch to ground control.

2 Pull out the ground red Emergency Stop button

to the on position.

3 Push and hold the function enable

button.

4 Activate the platform down function.

Operation From Ground

1 Turn the key switch to ground control.

2 Pull out both ground and platform red

Emergency Stop buttons to the on position.

3 Be sure the battery pack is connected before

operating the machine.

To Position Platform

1 Push and hold the function enable button.

2 Activate the platform up or the platform down

function.

Drive and steer functions are not available from the

ground controls.

OPERATING INSTRUCTIONS

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Comments to this Manuals

No comments

Genie GS-2668 DC User Manual Page 24

Comments to this Manuals