Genie Z34N-2100 Z-34 User Manual download pdf (Page 7)

Part No. 43654 Genie Z-34/22 & Genie Z-34/22N 5

Operator's Manual

Second Edition • Ninth Printing

SAFETY RULES

Collision Hazards

Be aware of limited sight

distance and blind spots

when driving or operating.

Be aware of boom position when rotating the

turntable.

The machine must be on a level surface or secured

before releasing the brakes.

Do not drive the machine with the brakes released.

If the travel alarm sounds when not driving, the

brakes are released.

Check work area for overhead obstructions or other

possible hazards.

Be aware of crushing hazards when grasping the

platform guard rail.

It is recommended that operators wear an approved

hard hat when operating the machine.

Observe and use the color-coded direction arrows

on the platform controls and drive chassis for drive

and steer functions.

Do not operate a boom in the path of any crane

unless the controls of the crane have been locked

out and/or precautions have been taken to prevent

any potential collision.

No stunt driving or horseplay while operating a

machine.

Do not lower the boom unless the area below is

clear of personnel and obstructions.

Limit travel speed according to the condition of the

ground surface, congestion, slope, location of

personnel, and any other factors which may cause

collision.

Use extreme care and slow speeds while driving

the machine in the stowed position on any slope.

Do not drive on a slope with boom raised.

Do not allow the machine speed on any slope to

exceed 3 mph / 4.8 km/h (walking pace).

Stop the machine by returning the drive control

handle to the center position or releasing the foot

switch.

When stopped on a slope, the machine may initially

move slightly downhill when the drive control handle

is moved to drive up the slope. Be sure the area

behind the machine is clear.

Do not drive on a slope with the wheels turned. Be

sure the wheels are aligned up and down the slope.

Always use a winch to

load and unload a

machine from a

transport vehicle.

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Comments to this Manuals

No comments

Genie Z34N-2100 Z-34 User Manual Page 7

Comments to this Manuals

Related products and manuals for For the car Genie Z34N-2100 Z-34