Genie Z-45 User Manual download pdf (Page 19)

Part No. 82600 Genie Z-45/25 & Genie Z-45/25J 17

Operator's ManualSecond Edition · Second Printing

FUNCTION TESTS

Test the Tilt Sensor

9 Turn the key switch to

platform control. Pull out

the platform red Emergency

Stop button to the on

position.

10 Open the engine side

turntable cover and locate

the tilt sensor to the right of

the hydraulic pump.

11 Press down one side of the tilt sensor.

Result: The alarm, located in the platform,

should sound.

Test Auxiliary Controls

12 Turn the key switch to ground control and shut

the engine off.

13 Pull out the red Emergency Stop button to the

on position.

14 Simultaneously hold the

auxiliary power switch on and

activate each boom function

toggle switch.

Note: To conserve battery power, test each

function through a partial cycle.

Result: All boom functions should operate.

1 Select a test area that is firm, level and free of

obstruction.

At the Ground Controls

2 Turn the key switch to ground control.

3 Pull out the red Emergency Stop button to

the on position.

Result: The beacon (if equipped) should flash.

4 Start the engine. See Operating Instruction

section.

Test Emergency Stop

5 Push in the red Emergency Stop button to the

off position.

Result: The engine will shut off after 2 to 3

seconds.

6 Pull out the red Emergency Stop button to

the on position and restart the engine.

Test the Machine Functions

7 Do not hold the function enable

switch to either side. Attempt to

activate each boom and platform

function toggle switch.

Result: All boom and platform functions should

not operate.

8 Hold the function enable switch to either side

and activate each boom and platform function

toggle switch.

Result: All boom and platform functions should

operate through a full cycle. The descent alarm

(if equipped) should sound while the boom is

lowering.

Machines equipped with Platform Level Control

Disable Function: The platform level toggle switch

will not operate when the primary boom is raised

past the drive speed limit switch.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

Comments to this Manuals

No comments

Genie Z-45 User Manual Page 19

Comments to this Manuals

Related products and manuals for For the car Genie Z-45