Genie Z-45 User Manual download pdf (Page 23)

Part No. 82600 Genie Z-45/25 & Genie Z-45/25J 21

Operator's ManualSecond Edition · Second Printing

42 Lower the secondary boom to the stowed

position.

43 Extend the primary boom approximately

1 foot / 30 cm.

44 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom extended should not

exceed 6 in / 15 cm per second.

45 Retract the boom to the stowed position.

If the drive speed with the primary boom raised, the

secondary boom raised or the primary boom

extended exceeds 6 int / 15 cm cm per second,

immediately tag and remove the machine from

service.

Test the Oscillate Axle

(oscillating axle-equipped models)

46 Start the engine from the platform controls.

47 Drive the right steer tire up onto a 6 inch /

15 cm block or curb.

Result: The three remaining tires should stay in

firm contact with the ground.

48 Drive the left steer tire up onto a 6 inch /

15 cm block or curb.

Result: The three remaining tires should stay in

firm contact with the ground.

49 Drive both steer tires up onto a 6 inch /

15 cm block or curb.

Result: The non-steer tires should stay in firm

contact with the ground.

FUNCTION TESTS

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 41 42

No comments

Genie Z-45 User Manual Page 23