Genie Z-45 User Manual Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 42
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
38 Genie Z-45/25 & Genie Z-45/25J Part No. 82600
Operator's Manual Second Edition · Second Printing
SPECIFICATIONS
Narrow Base Models Z-45/25 (no jib)
Height, working maximum 51 ft 5 in 15.7 m
Height, platform maximum 45 ft 5 in 13.9 m
Height, stowed maximum 6 ft 7 in 2.05 m
Horizontal reach maximum
1
24 ft 6 in
1
7.5 m
Width 5 ft 9 in 1.8 m
Length, stowed 18 ft 5.5 m
Maximum load capacity 500 lbs 227 kg
Wheelbase 6 ft 8 in 2.0 m
Turning radius (outside) 14 ft 4.3 m
Turning radius (inside) 5 ft 1.5 m
Turntable rotation (degrees) 359°
Turntable tailswing 0 in 0 cm
Power source Ford Gasoline/LPG LRG 425 EFI
(choice) OR Deutz Diesel F3L 1011
OR Perkins Diesel 104-22
Drive speed, stowed 4.8 mph 7.7 km/h
40 ft/6 sec 12.2 m/6 sec
Drive speed, 0.6 mph 1 km/h
booms raised 40 ft/45 sec 12.2 m/45 sec
Airborne noise emissions 73 dB
Maximum sound level at normal operating workstations
(A-weighted)
Ground clearance, center 8.5 in 21.6 cm
Ground clearance, minimum 7 in 17.7 cm
Controls 12V DC proportional
Weight See Serial Plate
(Machine weights vary with option configurations)
Platform dimensions, 6 foot 72 in x 30 in
(length x width) 1.8 m x 76 cm
Platform leveling self-leveling
Platform rotation 180 degrees
AC outlet in platform standard
Hydraulic pressure, maximum 3200 psi 221 bar
(boom functions)
System voltage 12V
Tire size, 2WD Industrial
Foam-filled only 9-14.5 LT
Gradeability, stowed, 2WD 30%
Fuel tank capacity 17 gallons 64.3 liters
Floor Loading Information
GVW+Rated Load 17,100 lbs 7756 kg
Axle load, maximum 11,200 lbs 5079 kg
Wheel load, maximum 7100 lbs 3219 kg
Localized pressure per tire 100 psi 7.03 kg/cm
2
690 kPa
Occupied floor pressure 267 psf 10.43 kPa
Note: Floor loading information is approximate and
does not incorporate different option configurations. It
should be used only with adequate safety factors.
1
Outreach specification with platform rotated
90 degrees
Continuous improvement of our products is a Genie policy. Product
specifications are subject to change without notice or obligation.
Page view 39
1 2 ... 35 36 37 38 39 40 41 42

Comments to this Manuals

No comments