Genie IWP Super Series 48643 User Manual download pdf (Page 19)

Part No. 48643 Genie IWP Super Series 17

Operator’s ManualSecond Edition • Fourth Printing

Operating Instructions

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator's

manual.

1 Avoid hazardous situations.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the work place.

5 Only use the machine as it was intended.

Fundamentals

Using the machine for anything other than lifting

personnel and tools to an aerial work site is

unsafe.

If more than one operator is expected to use a

machine at different times in the same work shift,

each operator is expected to follow all safety rules

and instructions in the operator's manual. That

means every new operator should perform a pre-

operation inspection, function tests and a work

place inspection before using the machine.

Setup

1 Pump the foot pedal to

raise the base until the

wheels contact the

ground.

2 Use the steering handle

to push the machine.

3 Position the machine on a firm, level surface

directly below the work area.

4 Pull the base lowering

handle to lower the base

until all four foot pads are

in firm contact with the

ground.

5 Connect to an appropriate power source:

DC models: Connect battery pack.

AC models: Connect to a grounded

15A AC power supply. Use a 12 gauge / 3.3mm

3-wire grounded extension cord no longer than

50 feet / 13 m.

6 Insert the key and turn to the ON position OR to

platform control.

7 Pull out the red Emergency Stop button at the

ground controls and be sure the power light is

on.

8 Check the interlock display. Be sure that all four

display lights are on.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Comments to this Manuals

No comments

Genie IWP Super Series 48643 User Manual Page 19

Comments to this Manuals

Related products and manuals for For the car Genie IWP Super Series 48643