Genie IWP Super Series 48643 User Manual download pdf (Page 20)

18 Genie IWP Super Series Part No. 48643

Operator’s Manual Second Edition • Fourth Printing

OPERATING INSTRUCTIONS

Emergency Stop

1 Push in the red Emergency Stop button at the

platform controls or at the ground controls to

stop the up function.

Platform Raise & Lower

1 Twist to release the red Emergency Stop button

at the platform controls.

2 Push in the control activate button and rotate

the up/down switch in the desired direction of

travel.

ANSI & CSA CE

a control activate button

b up/down switch

Manual Lowering

1 Activate the manual

lowering valve located

at the bottom of the

hydraulic cylinder.

Auxiliary Platform Lowering

1 Turn the key switch to ground control

(if equipped).

2 Activate the auxiliary platform lowering button at

the ground controls.

After Each Use

1 Select a safe storage location—firm, level

surface, weather protected, clear of obstruction

and traffic.

2 Pull the base lowering handle to lower the base

until all four foot pads are in firm contact with

the ground.

3 Remove the key to secure from unauthorized

use.

4 DC models: Recharge battery.

a b a b

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

No comments

Genie IWP Super Series 48643 User Manual Page 20