Genie GL-12 User Manual download pdf (Page 4)

2 Genie Lift Part No. 35566

Operator's Manual First Edition • Sixth Printing

Fall Hazards

Do not use as a personnel

lifting platform or step.

Do not stand or sit on the

forks, load platform or

boom.

Do not climb on the

machine.

Tip-over Hazards

Do not exceed the rated load capacity. See Load

Capacity Charts section.

Do not raise the load unless the leg lock pins have

been properly inserted into the legs.

Do not raise the load unless the correct length legs

are properly installed.

Do not raise the load unless the machine is on a

firm, level surface.

Do not move the machine with a raised load,

except for minor positioning.

Do not tilt the machine back with a raised load.

Do not use blocks to level the machine.

Do not operate the machine in strong or gusty

winds. Increasing the load surface area will

decrease machine stability in windy conditions.

SAFETY RULES

Do not place ladders or scaffolding against any part

of the machine.

Do not operate the machine unless the

wheel / leg / caster configuration is properly

installed.

Prior to use, check the work area for drop-offs,

holes, bumps, debris, unstable or slippery surfaces

or other possible hazardous conditions.

Avoid debris and uneven surfaces while rolling a

machine without the legs installed.

Do not replace machine parts critical to stability or

structure with items of different weight or

specification.

Do not cause a horizontal force or side load to the

machine by raising or lowering a fixed or

overhanging load.

Do not use the machine on a moving or mobile

surface or vehicle.

Collision Hazards

Do not raise if the load is not properly centered on

the forks or load platform.

Check the work area for

overhead obstructions or

other possible hazards.

Do not stand under or

allow personnel under the

machine when the load is

raised.

Do not lower the load unless the area below is clear

of personnel and obstructions.

Use common sense and planning when transporting

the machine on an incline, slope or stairs.

Maintain proper lubrication on the frame channels.

See the Pre-operation Inspection section.

Unlubricated frame channels can bind or stop

moving, which could result in the load shifting or

falling.

1 2 3 4 5 6 7 8 9 ... 25 26

Comments to this Manuals

No comments

Genie GL-12 User Manual Page 4

Comments to this Manuals

Related products and manuals for For the car Genie GL-12