Genie GL-12 User Manual download pdf (Page 14)

12 Genie Lift Part No. 35566

Operator's Manual First Edition • Sixth Printing

Test the Brake Operation

(if equipped)

1 Press down on the foot pedal to lock the brake.

2 Push the machine.

Result: The wheels should not roll.

3 Pull up on the foot pedal to release the brake.

4 Push the machine.

Result: The machine should move.

Test the Winch Operation

Note: The Genie Lift 4 does not have an inner

frame.

1 Rotate the winch handle clockwise to raise the

carriage.

Result: The carriage should raise to the top of

the inner frame and then the inner frame should

raise. The carriage and inner frame should

move smoothly, free of hesitation and binding.

2 Rotate the winch handle counterclockwise to

lower the carriage.

Result: The inner frame should lower into the

outer frame, and then the carriage should lower

into the inner frame. The carriage and inner

frame should move smoothly, free of hesitation

and binding.

Note: If the carriage and inner frame do not move

freely, the channels may need to be lubricated with

a dry silicone spray or silicone wax.

Test Electric Winch Operation

(if equipped)

Note: The Genie Lift 4 does not have an inner

frame.

1 Connect the battery pack.

2 Pull out the red Emergency Stop button to the

on position.

3 Push the up button on the hand controls.

Result: The carriage should raise to the top of

the inner frame and then the inner frame should

raise. The carriage and inner frame should

move smoothly, free of hesitation and binding.

The winch should turn off when the carriage

reaches maximum height.

4 Push in the red Emergency Stop button to the

off position.

5 Push the down button, then the up button.

Result: The up/down function should not

operate.

FUNCTION TESTS

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Comments to this Manuals

No comments