Genie GL-12 User Manual download pdf (Page 20)

18 Genie Lift Part No. 35566

Operator's Manual First Edition • Sixth Printing

Load Capacity Charts

Observe and Obey:

Failure to properly position the load may result

in death or serious injury.

Verify that the load you wish to raise does not

exceed the maximum load for your load center.

See the load capacity charts on the next page.

Tip-over hazard. Raising a load

that exceeds the machine capacity

may result in death or serious

injury.

A load center is defined as the balancing point

(center of gravity) of a load and must be

positioned within the load center zone.

Tip-over hazard. Failure to

position the load center within the

load center zone may result in

death or serious injury.

Forks

Load Positioning Instructions

1 Determine the weight of the load and the

location of its load center.

2 Measure to the load center from the side of the

load that will be closest to the carriage.

3 Refer to the chart on the next page to determine

if the machine is capable of lifting the weight at

the location on the forks.

4 Place the load so that it rests on the forks, as

close to the carriage as possible.

5 Position the load so that the load center is

within the load center zone.

measure to the load center

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Genie GL-12 User Manual Page 20