Genie SUPERLIFT 33547 User Manual download pdf (Page 17)

Part No. 33547 Genie Superlift Contractor 15

Operator's ManualFirst Edition • Ninth Printing

OPERATING INSTRUCTIONS

Moving Machine with a Load

It is best to move the machine on the worksite with

no load. Moving a raised load should be restricted

to positioning for loading and unloading. If it is

necessary to move the machine with a raised load,

understand and obey the following safety rules:

· Make sure the area is level and clear of

obstructions.

· Make sure the load is centered on the load

handling attachment.

· Make sure the load is secured to the load

handling attachment.

· Avoid sudden starts and stops.

· Travel with the load in the lowest possible

position.

· Keep personnel away from the machine and

load.

After Each Use

To prepare the machine for storage, follow the

Setup procedure in reverse order.

Select a safe storage location - firm level surface,

weather protected, clear of obstruction and traffic.

Setup

Select an area that is firm, level and free of

obstructions.

Follow the Setup procedures in the Function Tests

section.

Raising and Lowering Load

1 Center the load on the load handling attachment.

See Load Capacity Charts section.

2 Make sure the load is properly secured to the

load handling attachment.

3 Raise the load by

firmly grasping the

winch handles and

rotating them toward

the mast. Do not

allow the cable to

wind unevenly onto

the drum.

4 Lower the load by

firmly grasping the

winch handles and

rotating them away from the mast. After

lowering to the desired position, turn the winch

handles toward the mast (raise the load)

/4 turn

to set the brake.

down

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Comments to this Manuals

No comments

Genie SUPERLIFT 33547 User Manual Page 17

Comments to this Manuals