Genie SUPERLIFT 33547 User Manual download pdf (Page 18)

16 Genie Superlift Contractor Part No. 33547

Operator's Manual First Edition • Ninth Printing

Load Capacity Charts

Observe and Obey:

Failure to properly position the load may result in

death or serious injury.

Verify that the load you wish to raise does not

exceed the maximum load for your load center.

See Load Capacity Chart section.

Tip-over hazard. Raising a load

that exceeds the machine's

capacity may result in death or

serious injury.

A load center is defined as the balancing point

(center of gravity) of a load and must be

positioned within the load center zone.

Tip-over hazard. Failure to position

the load center within the load

center zone may result in death or

serious injury.

Forks

Load Positioning Instructions

1 Determine the weight of the load and the

location of its load center.

2 Measure to the load center from the side of the

load that will be closest to the carriage.

3 Refer to the chart on the next page to determine

if the machine is capable of lifting the weight at

the location on the forks.

4 Place the load so that it rests on the forks, as

close to the carriage as possible.

5 Position the load so that the load center is within

the load center zone.

6 Secure the load to the forks.

measure to the load center

See the chart on the next page for maximum load

centers for standard forks and adjustable forks.

Load Center

Zone

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24 25 26

No comments

Genie SUPERLIFT 33547 User Manual Page 18