Genie GS-5390 User Manual download pdf (Page 20)

18 Genie GS-3384 & GS-3390 & GS-4390 & GS-5390 Part No. 82828

Operator's Manual Second Edition • Third Printing

FUNCTION TESTS

Test Drive and Braking

27 Press and hold the function enable switch on the

control handle.

28 Slowly move the control handle in the direction

indicated by the blue arrow on the control panel

until the machine begins to move, then return

the handle to the center position.

Result: The machine should move in the

direction that the blue arrow points on the

control panel, then come to an abrupt stop.

29 Press and hold the function enable switch on the

control handle.

30 Slowly move the control handle in the direction

indicated by the yellow arrow on the control

panel until the machine begins to move, then

return the handle to the center position.

Result: The machine should move in the

direction that the yellow arrow points on the

control panel, then come to an abrupt stop.

Note: The brakes must be able to hold the machine

on any slope it is able to climb.

Test Limited Drive Speed

31 Push and hold the lift function enable button.

Raise the platform approximately 1.83 m from

the ground.

32 Press and hold the function enable switch on the

control handle.

33 Slowly move the control handle to the full drive

position.

Result: The maximum achievable drive speed

with the platform raised should not exceed

31 cm/s.

If the drive speed with the platform raised exceeds

31 cm/s, immediately tag and remove the machine

from service.

Test the Steering

Note: When performing the steer and drive function

tests, stand in the platform facing the steer end of

the machine.

24 Press and hold the function enable switch on the

control handle.

25 Depress the thumb rocker switch on top of the

control handle in the direction identified by the

blue triangle on the control panel.

Result: The steer wheels should turn in the

direction that the blue triangle points on the

control panel.

26 Depress the thumb rocker switch in the direction

identified by the yellow triangle on the control

panel.

Result: The steer wheels should turn in the

direction that the yellow triangle points on the

control panel.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Comments to this Manuals

No comments

Genie GS-5390 User Manual Page 20

Comments to this Manuals

Related products and manuals for For the car Genie GS-5390