Genie Z-34 User Manual download pdf (Page 39)

Operator's ManualSixth Edition · Second Printing

Part No. 1000209 Z-60/34 37

Specifications

Height, working maximum 66 ft 20.1 m

Height, platform maximum 60 ft 18.3 m

Height, stowed maximum 8 ft 10 in 2.7 m

Horizontal reach maximum 34 ft 10.4 m

Width 8 ft 1 in 2.5 m

Length, stowed 26 ft 9 in 8.2 m

Maximum load capacity 500 lbs 227 kg

Maximum wind speed 28 mph 12.5 m/s

Wheelbase 8 ft 3 in 2.5 m

Turning radius (outside) 40 ft 1 in 12.2 m

Turning radius (inside) 19 ft 9 in 6.1 m

Turntable rotation (degrees) continuous

Turntable tailswing 0

Drive speed, stowed 4.0 mph 6.4 km/h

40 ft/6.8 sec12.2 m/6.8 sec

Drive speed, 0.6 mph 1.0 km/h

raised or extended 40 ft/40 sec 12.2 m/40 sec

Airborne noise emissions 105 dB

Maximum sound level at normal operating workstations

(A-weighted)

Controls 12V DC proportional

Platform dimensions, 6 foot 30 x 72 in

(width x length) 76 cm x 1.8 m

Platform dimensions, 8 foot 36 x 96 in

(width x length) 91 cm x 2.4 m

Platform leveling self-leveling

Platform rotation 180°

AC outlet in platform standard

Hydraulic pressure, maximum 2400 psi 166 bar

(boom functions)

System voltage 12V

Tires 15 x 19.5, 16-ply

Gradeability, stowed, 2WD / 4WD 27% / 45%

Ground clearance 16 in 40.1 cm

Fuel tank capacity 33 gallons 125 liters

Weight See Serial Label

(Machine weights vary with option configurations)

Maximum slope rating, stowed position, 2WD

Counterweight uphill 25% (14°)

Counterweight downhill 20% (11°)

Side slope 25% (14°)

Maximum slope rating, stowed position, 4WD

Counterweight uphill 40% (22°)

Counterweight downhill 30% (17°)

Side slope 25% (14°)

Note: Slope rating is subject to ground conditions and

adequate traction.

Floor loading information

Tire load, maximum 9,931 lbs 4504 kg

Tire contact pressure 65 psi 4.57 kg/cm

448 kPa

Occupied pressure 254 psf 1240 kg/m

12.16 kPa

Note: Floor loading information is approximate and

does not incorporate different option configurations. It

should be used only with adequate safety factors.

Continuous improvement of our products is a Genie

policy. Product specifications are subject to change

without notice or obligation.

1 2 ... 34 35 36 37 38 39 40 41

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 39

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie Z-34