Genie Z-34 User Manual download pdf (Page 28)

Operator's Manual Sixth Edition · Second Printing

26 Z-60/34 Part No. 1000209

To Position Platform

1 Press down the foot switch.

2 Slowly move the appropriate function control

handle or toggle switch according to the

markings on the control panel.

To Steer

1 Press down the foot switch.

2 Slowly move the control handle in the direction

indicated by the blue or yellow triangles

OR press the thumb rocker switch located on

top of the drive control handle.

Use the color-coded direction triangles on the

platform controls and the drive chassis to identify

the direction the wheels will turn.

To Drive

1 Press down the foot switch.

2 Increase speed: Slowly move the drive control

handle off center.

Decrease speed: Slowly move the drive control

handle toward the center.

Stop: Return the drive control handle to the

center or release the foot switch.

Use the color-coded direction arrows on the

platform controls and the drive chassis to identify

the direction the machine will travel.

Machine travel speed is restricted when the booms

are raised or extended.

Auxiliary Controls

Use auxiliary power only if the primary power

source (engine) fails.

1 Turn the key switch to ground or platform

control.

2 Pull out the red Emergency Stop button to the

on position.

3 Press down the foot switch when operating the

auxiliary controls from the platform.

4 Simultaneously hold the auxiliary

power switch on and activate the

desired function.

The drive function will not operate with auxiliary

power.

Operation from Ground

1 Turn the key switch to ground control.

2 Pull out the red Emergency Stop button to

the on position.

3 Start the engine.

To Position Platform

1 Hold the function enable switch to

either side.

2 Move the appropriate toggle switch according to

the markings on the control panel.

Drive and steer functions are not available from the

ground controls.

Operation from Platform

1 Turn the key switch to platform control.

2 Pull out both the ground and platform red

Emergency Stop buttons to the on position.

3 Start the engine. Do not press down the foot

switch when starting the engine.

OPERATING INSTRUCTIONS

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 40 41

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 28

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie Z-34