Genie Z-34 User Manual download pdf (Page 24)

Operator's Manual Sixth Edition · Second Printing

22 Z-60/34 Part No. 1000209

FUNCTION TESTS

Test Limited Drive Speed

44 Press down the foot switch.

45 Raise the primary boom approximately

2 feet / 61 cm.

46 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom raised should not

exceed 1 foot / 30 cm per second.

47 Lower the primary boom to the stowed position.

48 Extend the primary boom approximately

2 feet / 61 cm.

49 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom extended should not

exceed 1 foot / 30 cm per second.

50 Retract the primary boom to the stowed

position.

51 Raise the secondary boom approximately

2 feet / 61 cm.

52 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the secondary boom raised should not

exceed 1 foot / 30 cm per second.

53 Lower the secondary boom to the stowed

position.

Note: If the drive speed with the primary boom

raised or extended or the secondary boom raised

exceeds 1 foot / 30 cm per second, immediately

tag and remove the machine from service.

Test Auxiliary Controls

54 Shut the engine off.

55 Pull out the red Emergency Stop button to

the on position.

56 Press down the foot switch.

57 Simultaneously hold the auxiliary power switch

on and activate each function control handle or

toggle switch.

Note: To conserve battery power, test each

function through a partial cycle.

Result: All boom and steer functions should

operate. Drive functions should not operate with

auxiliary power.

Test the Lift/Drive Select Function

(if equipped)

58 Press down the foot switch.

59 Move the drive control handle off center and

activate a boom function toggle switch.

Result: No boom functions should operate. The

machine will move in the direction indicated on

the control panel.

60 Repair any malfunctions before operating the

machine.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 40 41

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 24

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie Z-34