Genie Z-34 User Manual download pdf (Page 23)

Operator's ManualSixth Edition · Second Printing

Part No. 1000209 Z-60/34 21

FUNCTION TESTS

Test Drive and Braking

33 Press down the foot switch.

34 Slowly move the drive control handle in the

direction indicated by the blue arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The machine should move in the

direction that the blue arrow points on the drive

chassis, then come to an abrupt stop.

35 Slowly move the drive control handle in the

direction indicated by the yellow arrow on the

control panel until the machine begins to move,

then return the handle to the center position.

Result: The machine should move in the

direction that the yellow arrow points on the

drive chassis, then come to an abrupt stop.

Note: The brakes must be able to hold the machine

on any slope it is able to climb.

Test the Drive Enable System

36 Press down the foot switch and lower the boom

to the stowed position.

37 Rotate the turntable until the primary boom

moves past one of the non-steer wheels.

Result: The drive enable

indicator light should come

on and remain on while the

boom is anywhere in the

range shown.

38 Move the drive control handle off center.

Result: The drive function should not operate.

39 Move and hold the drive enable toggle switch to

either side and slowly move the drive control

handle off center.

Result: The drive function should operate.

Note: When the drive enable system is in use, the

machine may drive in the opposite direction that

the drive and steer control handle is moved.

Use the color-coded direction

arrows on the platform controls

and the drive chassis to identify

the direction of travel.

Test the Oscillate Axle

(oscillating axle-equipped

models)

40 Start the engine from the platform controls.

41 Drive the right steer tire up onto a 6 inch / 15

cm block or curb.

Result: The three remaining tires should stay in

firm contact with the ground.

42 Drive the left steer tire up onto a 6 inch / 15 cm

block or curb.

Result: The three remaining tires should stay in

firm contact with the ground.

43 Drive both steer tires up onto a 6 inch / 15 cm

block or curb.

Result: The non-steer tires should stay in firm

contact with the ground.

Blue

Yellow

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 23

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie Z-34