Genie Z-34 User Manual download pdf (Page 20)

Operator's Manual Sixth Edition · Second Printing

18 Z-60/34 Part No. 1000209

1 Select a test area that is firm, level and free of

obstruction.

At the Ground Controls

2 Turn the key switch to ground control.

3 Pull out the red Emergency Stop button to

the on position.

Result: The beacon (if equipped) should flash.

4 Start the engine. See Operating Instructions

section.

Test Emergency Stop

5 Push in the red Emergency Stop button to the

off position.

Result: The engine should turn off and all

functions should not operate.

Deutz Diesel models: The engine will shut off

after 2 to 3 seconds.

6 Pull out the red Emergency Stop button to

the on position and restart the engine.

Function Tests

Fundamentals

The Function Tests are designed to discover any

malfunctions before the machine is put into

service. The operator must follow the step-by-step

instructions to test all machine functions.

A malfunctioning machine must never be used. If

malfunctions are discovered, the machine must be

tagged and removed from service. Repairs to the

machine may only be made by a qualified service

technician, according to the manufacturer's

specifications.

After repairs are completed, the operator must

perform a pre-operation inspection and function

tests again before putting the machine into service.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator's

manual.

1 Avoid hazardous situations.

2 Always perform a pre-operation

inspection.

3 Always perform function tests prior to

use.

Know and understand the function tests

before going on to the next section.

4 Inspect the workplace.

5 Only use the machine as it was intended.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 40 41

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 20

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie Z-34