Genie Z-34 User Manual download pdf (Page 15)

Operator's ManualSixth Edition · Second Printing

Part No. 1000209 Z-60/34 13

PRE-OPERATION INSPECTION

Pre-operation Inspection

R Be sure that the operator’s, safety and

responsibilities manuals are complete, legible

and in the storage container located in the

platform.

R Be sure that all decals are legible and in place.

See Decals section.

R Check for engine oil leaks and proper oil level.

Add oil if needed. See Maintenance section.

R Check for hydraulic oil leaks and proper oil

level. Add oil if needed. See Maintenance

section.

R Check for engine coolant leaks and proper level

of coolant. Add coolant if needed. See

Maintenance section.

R Check for battery fluid leaks and proper fluid

level. Add distilled water if needed. See

Maintenance section.

R Check for proper tire pressure. Add air if

needed. See Maintenance section.

Check the following components or areas for

damage, improperly installed or missing parts and

unauthorized modifications:

R Electrical components, wiring and

electrical cables

R Hydraulic hoses, fittings, cylinders and

manifolds

R Fuel and hydraulic tanks

R Drive and turntable motors and drive hubs

R Boom wear pads

R Tires and wheels

R Engine and related components

R Limit switches and horn

R Alarms and beacons (if equipped)

R Nuts, bolts and other fasteners

R Platform entry mid-rail or gate

Check entire machine for:

R Crack in welds or structural components

R Dents or damage to machine

R Excessive rust, corrosion or oxidation

R Be sure that all structural and other critical

components are present and all associated

fasteners and pins are in place and properly

tightened.

R After you complete your inspection, be sure that

all compartment covers are in place and

latched.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 40 41

Comments to this Manuals

No comments

Genie Z-34 User Manual Page 15

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie Z-34