Genie Z-22N User Manual download pdf (Page 29)

Part No. 43654 Genie Z-34/22 & Genie Z-34/22N 27

Operator's Manual

Second Edition • Ninth Printing

Transport & Lifting Instructions

Observe and Obey:

The transport vehicle must be parked on a level

surface.

The transport vehicle must be secured to

prevent rolling while the machine is being

loaded.

Be sure the vehicle capacity, loading surfaces

and chains or straps are sufficient to withstand

the machine weight. See serial plate.

The machine must be on a level surface or

secured before releasing the brakes.

Always use a winch

to load and unload a

machine from a

transport vehicle.

Free-wheel Configuration for

Winching

1 Chock the wheels to prevent the machine from

rolling.

2 Release the non-steer wheel brakes by turning

over the torque hub disconnect caps (see

below).

Machines with remote brake switch:

Plug the switch into the adaptor at the ground

control box. Apply the remote brake release

switch while winching the machine.

3 Be sure the winch line is properly secured to the

drive chassis tie points and the path is clear of

all obstructions.

After the machine is loaded:

1 Chock the wheels to prevent the machine from

rolling.

2 Apply the non-steer wheel brakes by turning

over the torque hub disconnect caps (see

below).

Towing the Genie Z-34/22 or the Genie Z-34/22N is

not recommended. If the machine must be towed,

do not exceed 2 mph / 3.2 km/h.

Disengage

Position

Engage

Position

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 35 36

Comments to this Manuals

No comments