Genie Z-22IC User Manual download pdf (Page 5)

Operator's Manual

Fourth Edition • First Printing

Part No. 1000048 Z-34/22 IC 3

Do not drive over 0.6 mph / 1 km/h with the primary

boom raised or extended or the secondary boom

raised.

Do not raise the boom when wind speeds may

exceed 28 mph / 12.5 m/s. If wind speeds exceed

28 mph / 12.5 m/s when the boom is raised, lower

the boom and do not continue to operate the

machine.

Do not operate the machine in strong or gusty

winds. Do not increase the surface area of the

platform or the load. Increasing the area exposed to

the wind will decrease machine stability.

Use extreme care and slow speeds while driving

the machine in stowed position across uneven

terrain, debris, unstable or slippery surfaces and

near holes and drop-offs.

Do not drive the machine on or near uneven terrain,

unstable surfaces or other hazardous conditions

with the boom raised or extended.

Do not drive the machine on a slope that exceeds

the maximum uphill, downhill or side slope rating of

the machine. Slope rating applies only to machines

in the stowed position.

Maximum slope rating, stowed position, 2WD

Counterweight uphill 37% 20°

Counterweight downhill 20% 11°

Side slope 25% 14°

Maximum slope rating, stowed position, 4WD

Counterweight uphill 45% 24°

Counterweight downhill 40% 22°

Side slope 25% 14°

Note: Slope rating is subject to ground conditions

and adequate traction.

Do not push off or pull toward any object outside

of the platform.

Maximum allowable

side force - ANSI &

CSA

150 lbs / 667 N

Maximum allowable

manual force - CE

90 lbs / 400 N

Do not alter or disable machine components that in

any way affect safety and stability.

Do not replace items critical to machine stability

with items of different weight or specification.

SAFETY RULES

1 2 3 4 5 6 7 8 9 10 ... 39 40

Comments to this Manuals

No comments

Genie Z-22IC User Manual Page 5

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie Z-22IC