Genie Z-22IC User Manual download pdf (Page 28)

Operator's Manual Fourth Edition • First Printing

26 Z-34/22 IC Part No. 1000048

Drive Enable

Light on indicates that the boom

has moved just past either non-

steer wheel and the drive

function has been interrupted.

To drive, hold the drive enable switch to either side

and slowly move the drive control handle off center.

Be aware that the machine may move in the

opposite direction that the drive and steer controls

are moved.

Always use the color-coded direction arrows on the

platform controls and the drive chassis to identify

the direction the machine will travel.

Drive Speed Select

· Machine on incline symbol: Low range operation

for inclines

· Machine on level surface symbol: High range

operation for maximum drive speed

Engine Idle Select (rpm)

Select the engine idle (rpm) using the symbols on

the control panel.

· Rabbit and foot switch symbol: foot switch

activated high idle

· Turtle symbol: low idle

· Rabbit symbol: high idle

Generator (if equipped)

To start the generator, move the generator toggle

switch to the on position.

Plug a power tool into the power to platform GFCI

outlet.

To turn off the generator, move the generator toggle

switch to the off position.

Note: Machine functions will not operate while the

generator is running and the foot switch is not

pressed down. When the foot switch is pressed

down, the generator will turn off and the machine

functions will operate.

OPERATING INSTRUCTIONS

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

No comments

Genie Z-22IC User Manual Page 28