Genie TMZ-19 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
4 Genie TMZ-34/19 Part No. 97866
Operator's Manual Fourth Edition • First Printing
Collision Hazards
Be aware of boom position when rotating the
turntable.
The machine must be on a level surface or secured
before releasing the parking brake.
Use the parking brake to control the speed of the
machine when pushing a machine that is not
attached to a tow vehicle.
Check the work area for overhead obstructions or
other possible hazards.
Do not lower the boom unless the area below is
clear of personnel and obstructions.
Do not operate a boom in the path of any crane
unless the controls of the crane have been locked
out and/or precautions have been taken to prevent
any potential collision.
No stunt driving or horseplay while operating the
machine.
Component Damage Hazards
Do not use the machine as a ground for welding.
Do not fully lower the booms unless the booms are
aligned with the tongue. The booms must be
lowered onto the boom rests.
SAFETY RULES
Lifting Hazards
Use proper lifting techniques to move, load or
unload the machine.
Use proper lifting techniques when installing or
removing the platform.
Explosion and Fire Hazards
Do not operate the machine in hazardous locations
or locations where potentially flammable or
explosive gases or particles may be present.
Damaged Machine Hazards
Do not use a damaged or malfunctioning machine.
Conduct a thorough pre-operation inspection of the
machine and test all functions before each work
shift. Immediately tag and remove from service a
damaged or malfunctioning machine.
Be sure all maintenance has been performed as
specified in this manual and the appropriate service
manual.
Be sure all decals are in place and legible.
Be sure the operator’s, safety and responsibilities
manuals are complete, legible and in the storage
container located on the platform.
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 36 37

Comments to this Manuals

No comments