Genie TMZ-19 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 37
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
Part No. 97866 Genie TMZ-34/19 3
Operator's Manual
Fourth Edition • First Printing
Do not move the machine when the boom is raised.
Do not depend on the tilt alarm as a level indicator.
The tilt alarm sounds in the platform only when the
machine is on a severe slope.
When the tilt alarm sounds, immediately lower the
boom and adjust the outriggers to level the
machine. When the alarm sounds, boom up
functions will not operate.
Do not alter or disable the limit switches.
Do not operate the
machine in strong or
gusty winds. Do not
increase the surface
area of the platform or
the load. Increasing the
area exposed to the wind
will decrease machine
stability.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not replace items critical to machine stability
with items of different weight or specification.
Do not modify or alter an aerial work platform.
Mounting attachments for holding tools or other
materials onto the platform, toeboards or guard rail
system can increase the weight in the platform and
the surface area of the platform or load.
Do not transport tools and materials unless they are
evenly distributed and can be safely handled by
person(s) in the platform.
Do not place ladders or scaffolds in the platform or
against any part of this machine.
Do not use the machine on a moving or mobile
surface or vehicle.
SAFETY RULES
Be sure all tires are properly inflated and in good
condition and lug nuts are properly tightened.
Do not use batteries that weigh less than the
original equipment. Four batteries are used as
counterweight and are critical to machine stability.
Each battery must weigh 75 pounds / 34 kg.
Do not push the machine or other objects with the
boom.
Do not contact adjacent structures with the boom.
Do not tie the boom or platform to adjacent
structures.
Bodily Injury Hazard
Do not operate the machine with a hydraulic oil or
air leak. An air leak or hydraulic leak can penetrate
and/or burn skin.
Improper contact with components under any cover
will cause serious injury. Only trained maintenance
personnel should access compartments. Access
by the operator is only advised when performing a
pre-operation inspection. All compartments must
remain closed and secured during operation.
Page view 4
1 2 3 4 5 6 7 8 9 10 ... 36 37

Comments to this Manuals

No comments