Genie TMZ-19 User Manual download pdf (Page 24)

22 Genie TMZ-34/19 Part No. 97866

Operator's Manual Fourth Edition • First Printing

At the Ground Controls

1 Insert the key and turn to ground control.

2 Pull out the red Emergency Stop buttons at the

ground and platform controls.

3 Models with manual outriggers: Select an

outrigger. Maintain a firm grasp on the outrigger.

Pull the outrigger release handle and lower the

outrigger. Be sure the outrigger lock pin is

locked. Repeat the procedure for each of the

remaining outriggers.

Adjust the outriggers to level the machine and

raise the wheels slightly off the ground. Level

the machine using only the outriggers. Use the

bubble level to make sure the machine is level.

Models with hydraulic outriggers: Push and

hold the yellow function enable button. Push

and hold the auto level button or the individual

outrigger buttons to lower the outriggers and

level the machine. Level the machine using only

the outriggers. Use the bubble level to make

sure the machine is level.

Test Emergency Stop

4 Push in the ground red Emergency Stop button

to the off position.

Result: All ground and platform control functions

should not operate.

5 Pull out the red Emergency Stop button to

the on position.

Test Outrigger Interlock

6 Unscrew one leveling jack or use the leveling

buttons to raise one outrigger off the ground.

Result: All boom functions should not operate.

7 Return the leveling jack to the previous setting

or use the leveling buttons to lower the

outrigger.

8 Repeat the procedure for each outrigger.

Test the Boom Functions

9 Do not push a function enable button. Attempt to

activate each boom function button.

Result: All boom functions should not operate.

10 Push and hold the blue function enable button.

Activate each boom function button.

Result: Primary boom up, primary boom extend,

secondary boom up and turntable rotate right

should all function.

11 Push and hold the yellow function enable button.

Activate each boom function button.

Result: Primary boom down, primary boom

retract, secondary boom down and turntable

rotate left should all function.

FUNCTION TESTS

STOP

Note: Perform the appropriate function tests for

your control system. Determine whether the control

panels on your machine match the ones below or

the ones on page 20. Follow the step-by-step

instructions below the pictures to test all machine

functions

Platform Control Panel

Ground Control Panels

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 36 37

Comments to this Manuals

No comments

Genie TMZ-19 User Manual Page 24

Comments to this Manuals

Related products and manuals for Utility Vehicle Genie TMZ-19