Genie TMZ-19 User Manual download pdf (Page 23)

Part No. 97866 Genie TMZ-34/19 21

Operator's Manual

Fourth Edition • First Printing

FUNCTION TESTS

Test the Boom Functions

10 Do not hold a function enable/speed select

button. Attempt to activate each boom function

button.

Result: All boom functions should not operate.

11 Press and hold a function enable/speed select

button. Activate each boom function button.

Result: All boom functions should operate

through a full cycle.

Test the Tilt Sensor

12 Raise the jib boom approximately 6 in / 15 cm.

Raise the primary boom approximately 6 in /

15 cm off the boom rest. Raise the secondary

boom approximately 6 in / 15 cm off the boom

rest.

13 Locate the tilt sensor on

the chassis near the

ground controls.

14 Press down one side of the

tilt sensor and place the tilt

sensor test tool under one

of the posts.

Result: The alarm, located in the platform,

should sound after 1 second. The interlock

display light should flash.

15 Test all ground and platform control functions.

Result: The primary boom up, the secondary

boom up and the jib boom up functions should

not operate. The primary boom down, the

secondary boom down, the jib boom down and

the turntable rotate functions should operate

normally.

16 Remove the tilt sensor test tool.

17 Turn the key switch to platform control.

At the Platform Controls

18 Pull out the red Emergency Stop buttons at the

ground and platform controls.

Test Emergency Stop

19 Push in the platform red Emergency Stop button

to the off position.

Result: The power will shut off and all platform

control functions should not operate.

Test the Horn

20 Pull out the red Emergency Stop button to the

on position.

21 Push the horn button.

Result: The horn should sound.

Test Machine Functions

22 Do not hold a function enable/speed select

button. Attempt to activate each boom function

button.

Result: All boom functions should not operate.

23 Press and hold a function enable/speed select

button.

24 Activate each boom function button.

Result: All boom functions should operate

through a full cycle.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 36 37

Comments to this Manuals

No comments