Genie TZ-50 User Manual download pdf (Page 28)

26 Genie TZ-50 Part No. 114164

Operator's Manual Second Edition • First Printing

OPERATING INSTRUCTIONS

Towing

1 Set the parking brake.

2 Secure the boom with the hold-down latches.

3 Models with platform rotate: Make sure the

platform is in the center position. If the platform

is off center, the taillights may not be visible on

the road.

4 Raise the tongue by turning the jack handle.

5 Position the ball of the transport vehicle directly

under the ball coupler.

6 Open the latch on the ball coupler.

7 Lower the tongue by turning the jack handle.

8 Close the latch on the ball coupler.

9 Attach the safety chains (if required) and the

brake cables to the vehicle. Cross the chains

under the hitch.

10 Pull the jack release handle and rotate the

tongue jack to the stowed position.

11 Connect and test the trailer lights.

12 Release the parking brake.

After Each Use

1 Rotate the turntable so that the platform is

opposite the tongue of the machine.

2 Lower the boom into the mast cradles.

3 Secure the boom with the hold-down latches.

4 Turn the key switch to the off position and

remove the key to secure from unauthorized

use.

5 Charge the batteries (if necessary).

Storage

1 Make sure the boom is properly stowed and the

hold-down latches are secured.

2 Raise and stow the outriggers.

3 Select a safe parking location—firm level

surface, clear of obstructions and traffic.

4 Turn the key switch to the off position and

remove the key to secure from unauthorized

use.

5 Chock the wheels.

6 Charge the batteries (if necessary).

Backing Up with Hydraulic Surge

Brake (ANSI, CSA and Australian

models)

If your machine is equipped with a hydraulic surge

brake, the system must be released before

backing up.

Consult the surge brake system manual for

specific instructions on each surge brake.

Be sure that the machine is returned to towing or

operating configuration when finished.

Moving Machine Without a Tow

Vehicle

Do not attempt to manually move a machine

unless it is on a firm, level surface. Use the parking

brake to control the speed of the machine while

pushing it.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 40 41

Comments to this Manuals

No comments

Genie TZ-50 User Manual Page 28

Comments to this Manuals

Related products and manuals for Tools Genie TZ-50